NO OTHER COLD ASPHALT WILL WORK OR PERFORM LIKE ProLine

Specifications for ProLine ® Cold Asphalt
Polymer Modified Cold Asphalt Patching Material
All Weather Mix

GENERAL
This bituminous polymer modified cold patching material is designed to be applied in the ambient temperature range of 0°F to 100°F. The mixture will provide satisfactory coating, workability, adhesive and cohesive characteristics while functioning during cool to hot and / or wet to dry climatic conditions. Once in place and compacted, ProLine ® Polymer modified cold asphalt is virtually unaffected by changes in weather conditions or exposure to weighted and / or continuous traffic flow.

LIQUID ASPHALT BLEND
The liquid asphalt component used shall be polymer modified PG 64-22 ProLine ® blend and be capable of passing AASHTO T-182 as modified herein.

AGGREGATE
The gradation should comply with the following limits except in the case where other studied and approved aggregates are required by the agency and approved by ProLine ® producer. Aggregate type is limestone.

PERCENT PASSING
Sieve
ProLine ® All Weather Mix
3/4"
100
1/2"
100
3/8"
100
No. 4
70-100
No. 10
28-40
No. 40
0-10
No. 80
0-6
No.200
0-3.5

Extraction ASTM D2172 0.5%
Gradation AASHTO T-30 Tolerance within ProLine® Range
Resistance to Water Damage AASHTO T-182 modified* + 95%
Outdoor Shelf Life Visual One Year., 50 ton min. @ 6' height
*Note #1: The modification of T-182 consists of immersion of sample at 140°F for 24 hours.

SHELF LIFE
Depending on handling and stockpiling practices (minimum 50 ton stockpile), ProLine® Polymer modified cold asphalt bulk material can be stored outdoors unprotected for extended periods of up to one (1) year while still retaining its performance characteristics. Pro Line® Polymer modified cold asphalt packaged material is guaranteed fresh for one (1) year if unopened.

PERFORMANCE
ProLine® Polymer modified cold asphalt material is guaranteed to perform adequately under normal circumstances in its intended use for a minimum period of six (6) months. This guarantee is limited to the replacement of any material determined by Pro Line® producer to be defective and does not cover any consequential damages resulting from the use of the product.

AVAILABILITY
ProLine® Polymer modified cold asphalt shall be available in both bulk and packaged form. ProLine® Polymer modified cold asphalt shall be available FOB at plant at all times and capable of delivery within seventy-two (72) hours of request (delivery available within twenty-four (24) hours when required).

PACKAGING
ProLine® Polymer modified cold asphalt package shall be of a flexible poly type material treated with UV protectant and sealed by heat. Bags shall be palletized on wooden pallets measuring approximately 40" x 48" with cardboard pallet box, plastic pallet shroud, and plastic stretch wrap. Package weight shall be 35 lb. or 50 lb (Unless otherwise specified).

 

 
 
   

Home | Safety Data | Facts | Gallery | Contact Us | Answers | More